PRODUCTS Safety Relief Valves Pressure Relief Valves Gauges, Probes, Plugs, Calibration and Repairs Control Valves Weather Cap Girard Vents Surplus and Reconditioned Valves
All Categories > Gauges, Probes, Plugs, Calibration, and Repairs  
 

Gauges, Probes, Plugs, Calibration, and Repairs


Click on a Product to view details.

Gauge-2

Vaetrix Gauge 2 Precision Electronic Deadweight Tester


A deadweight tester is specified as accurate to a tenth of a percent contingent on the tester being properly levelled and hooked into the system and providing that:
  • The pressure is in the upper 90% of its range
  • The weights are clean and unscarred
  • The operator is experienced, and that
  • The climate is such that he is willing to take all the time necessary to get an accurate reading using as few weights as possible.
When Vaetrix specifies the Gauge accuracy to be better than 0.1% we guarantee that the total error (allowing for temperature shift) for any reading in the device's range shall not exceed 0.1% of full scale regardless. The Gauge has proven itself in harsh environments under rugged handling as an accurate and ...
1

Vaetrix Gauge 3 Precision Pressure and Temperature Sensing


Precision and Toughness for Field Testing

The new Vaetrix® Gauge 3® Pressure indicator from Taylor Valve Technology, Inc. is the industry's first portable precision electronic pressure and temperature gauge specifically designed for superior performance under tough field service conditions. From its reliable microprocessor-based technology, to its rugged, lightweight case, the easy-to-handle Gauge 3 sets a new standard for performance Pressure accuracy of 0.05% and highly-accurate measurement of temperature conditions in the field are a plus.

Thanks to the Gauge 3's straightforward design and commonsense display, even operators with little or no field operating experience achieve remarkable results the first time out. ...
1/4" FNPT Slip-ON GAUGE PROBE VAC to 5000 P.S.I.

Taylor Valve Gauge Probes

(10)
The Taylor Valve Gauge Plug and Probe system has been a standard in the oil field since 1959. In fact, Taylor Valve Gauge Plugs are used throughout the world for a variety of applications.

The small area of the stainless needle means that only a 6 lb. push per 1000 psi in the system is required to force the probe into the Gauge Plug and open the valve.

Lock-On-Probes are recommended where the pressure or sample device is to be mounted onto the Gauge Plug or where the pressure on the Gauge Plug exceeds 5000 psi.

Application
  1. Troubleshoot complicated hydraulic or pneumatic circuits during operation without breaking pressure in lines.
  2. Sample line fluids in seconds.
  3. Gauge corrosive fluids or sour gas ...
1/4" FNPT or 1/2" MNPT 304 S.S. LOCK ON GAUGE PLUG (Metal Threaded cap) VAC to 15000 P.S.I.

Taylor Valve Gauge Plugs

(15)
The Taylor Valve Gauge Plug and Probe system has been a standard in the oil field since 1959. In fact, Taylor Valve Gauge Plugs are used throughout the world for a variety of applications.

The small area of the stainless needle means that only a 6 lb. push per 1000 psi in the system is required to force the probe into the Gauge Plug and open the valve.

Lock-On-Probes are recommended where the pressure or sample device is to be mounted onto the Gauge Plug or where the pressure on the Gauge Plug exceeds 5000 psi.

Application
  1. Troubleshoot complicated hydraulic or pneumatic circuits during operation without breaking pressure in lines.
  2. Sample line fluids in seconds.
  3. Gauge corrosive fluids or sour gas ...
Mini-Gauge Plugs (Non Repairable)

Taylor Valve Mini-Gauge Probes

(4)
Mini-Gauge probes offer either brass or stainless steel models. Max. operating pressure VAC to 3000 psi - VAC to 5000 psi. 1/4" FNPT or 1/8" NPT Connection sizes.
Gauge Plug Repair

Taylor Valve Gauge Plug Repair

(3)
316 Stainless Steel Gauge Repair Cartridge Assembly VAC to 5000/10000/15000 P.S.I.
Mini-Gauge Plugs (Non Repairable)

Taylor Valve Mini Gauge Plugs (Non - Repairable)

(2)
1-1-3

Taylor Valve 140-LCD


An industry leader in the design and manufacturing of fluid control and measurement devices, Taylor Valve Technology control products are engineered and manufactured to the highest standards of precision to deliver a greater level of measurement accuracy with a minimum of moving parts.
For a more environmentally responsible design and more accurate results, you can always count on Taylor technology.

Taylor Model 140-LCD

A head pressure type level indicator, the Model 140-LCD continuously indicates liquid level in an atmospheric (vented) vessel- The Model 140 is a significant upgrade over other products on the market, helping to ensure longer service life and reduced maintenance requirements while increasing the ...
Optional adjustable probe and cable extend Gauge 3's capability

Adjustable Probe and Cable for Vaetrix Gauge 3


Adjustable probe and cable extend Gauge 3's capability
An Optional, rugged carrying case projects instrument and accessories.

Rugged Carrying Case for Vaetrix Gauges and Accessories


Rugged carrying case protects instrument and accessories.
Site created by ThomasNet Web Solutions
Pacific Industrial Service Inc. | On Call 24 hours a day, 7 days a week