PRODUCTS Safety Relief Valves Pressure Relief Valves Gauges, Probes, Plugs, Calibration and Repairs Control Valves Weather Cap Girard Vents Surplus and Reconditioned Valves
All Categories > Gauges, Probes, Plugs, Calibration, and Repairs > Taylor Valve Gauge Plugs > Item # 16-155554GP-LSD-1/2"  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # 16-155554GP-LSD-1/2", 1/2" MNPT 2205 Duplex Lock-on HP Gauge Plug



1/4" FNPT or 1/2" SIMM 316 S.S. LOCK-ON GAUGE PLUG (Slip-On Plastic Cap) VAC to 10000 P.S.I.

larger image
The Taylor Valve Gauge Plug and Probe system has been a standard in the oil field since 1959. In fact, Taylor Valve Gauge Plugs are used throughout the world for a variety of applications.

The small area of the stainless needle means that only a 6 lb. push per 1000 psi in the system is required to force the probe into the Gauge Plug and open the valve.

Lock-On-Probes are recommended where the pressure or sample device is to be mounted onto the Gauge Plug or where the pressure on the Gauge Plug exceeds 5000 psi.

Application
  1. Troubleshoot complicated hydraulic or pneumatic circuits during operation without breaking pressure in lines.
  2. Sample line fluids in seconds.
  3. Gauge corrosive fluids or sour gas with safety.
  4. Read pressures and take samples on reverse osmosis systems.
  5. Take pressures on water flood injection systems.
  6. Take pressure on ammonia or steam lines.
  7. Calibrate or test the accuracy of fixed pressure gauges or meters.
  8. Check filter pressure differential.
Advantages of the Gauge Plug & Probe System
  1. Seal is bubble tight.
  2. Metal to metal seat plus elastomer seal.
  3. All Stainless Steel construction.
  4. Probe on, take a reading and probe off in seconds.
  5. Screen filters debris which eliminates potential clogs.
  6. Unique design moving slots past o-rings prevents seal damage,
  7. The zero of the pressure gauge can be checked before and after probing is on.
  8. The probe needle does not have to be lubricated prior to probing.
  9. Reduces cost of gauge loss due to theft or vandalism.
  10. Eliminates excessive wear on expensive, delicate gauges due to harsh environments, vibration, pressure pulsation or mechanical shock.


Unit of Measure: Imperial | Metric | Both 

 Specifications  

Connection Size

1/2" MNPT

Operating Pressure

VAC to 10000 psi

Body & Inlet Material

2205 Duplex

 MORE IMAGES 

· Gauge Probes

· Gauge-Probe-Gauge-Plug


 Gauge Plug Repair 


Gauge Plug Repair

16-204905
316 Stainless Steel VAC to 10000 P.S.I.

 Gauge Plug Repair 


Gauge Plug Repair

16-304605
316 Stainless Steel VAC to 15000 P.S.I.

Request Information
Site created by ThomasNet Web Solutions
Pacific Industrial Service Inc. | On Call 24 hours a day, 7 days a week