PRODUCTS Safety Relief Valves Pressure Relief Valves Gauges, Probes, Plugs, Calibration and Repairs Control Valves Weather Cap Girard Vents Surplus and Reconditioned Valves
All Categories > Pressure Relief Valves > Taylor Valve Series 8200/8300 Relief Valves (Flanged & Threaded) > View Items  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Taylor Valve Series 8200/8300 Relief Valves (Flanged & Threaded)

Check up to five results to perform an action.

Taylor Valve 8200/8300 Safety Relief Valves are engineered and manufactured to the highest standards and feature a "state-of-the-art" soft seat which gives you a bubble-tight seal for hundreds of "pops". Our unique patented radius disc design assures a reliable reseat even under the most difficult conditions.

USES: Air, Gas, or Liquid relief applications, including compressors, separators, heater treaters, free water knockouts, scrubbers, dehydrators, thermal relief, gas production units, transmission and gathering lines, chemical plants, refineries, meter runs, gas plants, and other industrial applications.

Features
  • ASME Section VIII Div 1 code rated for Air, Liquid and Gas
  • Zero Leakage to set point
  • Superior Spring Design and Material enhance the performance of the product and provide consistent opening and closing pressures.
Benefits
  • Our Patented Radius Disc reduces the amount of interference required to seal and assures a reliable reseat even under the most difficult conditions - up to hundreds of "pops".
  • High Endurance Soft Seat supports repeated operation and a bubble-tight shutoff everytime
  • Radius Disc and Seat Design supports the spring alignment and promotes proper seating
  • Low Simmer Rate
  • Consistent Blowdown.
General Operation
Taylor's 8200/8300 Series Safety Relief Valve actuates when the pressure under the valve overcomes the spring force on the disc causing the valve to open, releasing overpressure from the system before re-closing.

All 8200/8300 Series Valves meet the requirements of the ASME Boiler and Pressure Vessel Code Sec VIII, Div. 1 for Air and Gas. Capacity ratings were established by testing performed at the National Board of Boiler and Pressure Vessel Inspectors, Columbus, Ohio.




Compare Items
   
  Results 1 - 6 of 6 Unit of Measure: Imperial Metric Both 1 

Item #

Inlet Size

Connection Type

Inlet x Outlet
Range

Available Flange Class Inlet x Outlet Range

1" 8200 VALVE FLANGED 1 in Flanged 1/2 x 1 to 1 1/2 x 2 150 x 150 to 1500 x 300
1" 8200 VALVE THREADED 1 in Threaded 1/2 x 1 to 1 1/2 x 2 150 x 150 to 1500 x 300
2" 8200 VALVE FLANGED 2 in Flanged 1 1/2 x 2 to 2 x 3 150 x 150 to 1500 x 300
2" 8200 VALVE THREADED 2 in Threaded 1 1/2 x 2 to 2 x 3 150 x 150 to 1500 x 300
3" 8300 VALVE FLANGED 3 in Flanged 2 x 3 to 3 x 4 150 x 150 to 600 x 150
3" 8300 VALVE THREADED 3 in Threaded 2 x 3 to 3 x 4 150 x 150 to 600 x 150
  Results 1 - 6 of 6 1 
Site created by ThomasNet Web Solutions
Pacific Industrial Service Inc. | On Call 24 hours a day, 7 days a week